-14409 Marine Gelcoat for Boat Building, Repair and Composite Coatings (White)

Description: About this itemPREMIUM MARINE-GRADE POLYESTER GELCOAT: More durable than standard orthophthalic gelcoat, this is the smart choice for cosmetic gelcoat repair, hull coatings, boat building, layups and exterior coatings for composite parts on boats, motorcycles, RVs & moreIDEAL FOR COSMETIC REPAIRS, EASY TO TINT with a polyester resin or gelcoat coloring agent to color match your existing gelcoat; tint white gelcoat to get pastel colors; tint neutral gelcoat for dark, bold colors. Add colorants before adding MEKP catalystEASY ONE-STEP APPLICATION USING A BRUSH, ROLLER OR SPRAY GUN: Non-sagging, high-viscosity formula is easy to apply and has great coverage. At 77°F, pot life is 8-12 minutes. Cured gelcoat is easy to sand, buff and polish to a high-gloss, showroom finishCHOOSE THE RIGHT GELCOAT FOR YOUR PROJECT: For polyester resin layups, use gelcoat without wax as the first coat inside a prepared layup; as a final coat, use gelcoat with wax (the wax makes the gelcoat dry tack-free); if needed, thin with styrene onlyAVAILABLE IN WHITE OR NEUTRAL, WITH OR WITHOUT WAX. White gelcoat comes in Quart and Gallon sizes; Neutral gelcoat comes in Quart size ONLY. Includes MEKP catalyst. Coverage: About 12.8 sq ft/gal at 1/8" thick, 25.7 sq ft at 1/16", 51.3 sq ft at 1/32".Product DescriptionTotalBoat Gel Coat creates a durable, super-smooth, high-gloss coating on boat hulls, RVs, composite parts, and even repairs to fiberglass showers and tubs, pools and more. This high-quality boat gel coat contains a premium-grade ISO NPG polyester resin more durable than orthophthalic resins, and is preferred in boat building and as a gelcoat repair kit for boats due to greater strength, flexibility & protection against damage from water, weather, and chemicals. Gelcoats are available without wax for use in layups, and with wax for finishing. 2% MEKP catalyst is best, but in cooler conditions, add up to 3% MEKP. In warmer conditions or for added working time, add 1% MEKP. Cured gelcoat can be dewaxed, wet sanded & buffed to a high-gloss, protective finish. Gelcoat without wax is used for the initial layer of a layup, but for a tack-free cure, mix in a paraffin wax additive (sold separately) at a rate of 20 drops per ounce of gelcoat without wax (16 oz. of Gelcoat w/o Wax = 1/4 oz. of Wax Additive, 32 oz of Gelcoat w/o Wax = ½-1 oz of Wax Additive, and 1 gal. of Gelcoat w/o Wax = 2-4 oz of Wax Additive). TotalBoat Gelcoats can also be tinted to achieve a desired color. For neutral gelcoat, add 10% polyester resin or gelcoat colorant (12% for yellow, red, purple, light green and orange). For white gel coat, use up to 1% gelcoat coloring agent. Always mix colorant into gelcoat before adding MEKP. If thinning, use styrene. If applying inside a layup as the first layer, use a release agent first. If applying over TotalBoat TotalFair epoxy fairing compound, apply TotalBoat 2-Part Epoxy Primer or TotalProtect before applying Gelcoat boat paint. Compare to Gelcoats from West Marine, FGCI, Fibre Glast, Fiberglass Supply Depot, Polymer Planet, Hi-Bond and Evercoat Gel-Kote. Gelcoat should be part of every boat fiberglass repair kit. All TotalBoat products are developed for boaters by boaters to provide great value and great results. 100% made in the USA.

Price: 54.99 USD

Location: New York, New York

End Time: 2025-01-01T09:52:10.000Z

Shipping Cost: 0 USD