19mm Ball Joint Puller Separator Tie Rod End Remover Removal Tool Universal

Description: How to usesSlip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded endTightening the bolt until you have a good amount of resistance;Tap the attachment point and or the finger with a hammer tighten some more and tap again;When the stud comes loose, it will be all at once as the tool falls free and you will hear a “pop”FeaturesFor Separating the Ball Joint From the Spindle Support Arm on Domestic and Import Front Wheel Drive VehiclesIt works on most cars and light trucksHeat Treated Drop Forged, steel body and bolt for long rough usageSpread ball joints easily from the spindle support arm.Fork opening:19mmApplication It has a 9/10-inch adjustable height and can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles.Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, and ATPs is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm.Versatile: Universal; For use on American domestic and European imported/foreign vehicles; For cars, trucks, and even ATPs maximum opening capacity. It will accept a ¾ inch socket or wrench. Constructed from cast steel with a hardened steel pivot pin and jackscrew, this scissors-type tool can be used in the shop regularly and perfectly removes tie rod ends and lower ball joints without damaging the grease boots.The 1-1/8inches and 2-1/8inches maximum opening capacity accepts 3/4inches sockets or wrenches with a 4/5inches fork opening.Can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles; Scissors-type design

Price: 19.27 USD

Location: Rancho Cucamonga, California

End Time: 2024-11-22T01:20:29.000Z

Shipping Cost: 1.27 USD