AC600/AC1200 2.4G+5G Dual Band High Power Outdoor Router Repeater Passive PoE

Description: AC600 AC1200 Wavlink Brings Technology to Life WN570HA1 is designed to provide WISP, CPE solutions and long-range wireless network solution for video surveillance and transmission. With two omni-directional 7dBi dual-polarized antennas and strong transmit power of up to 1000mW, it provides a compelling performance solution for small and growing business at a very affordable price and also provides an efficient way to pick up and maintain a stable signal for a wireless network connection from long distance. High1000mW power and dual polarization delivers long-range coveragePassive PoE(power over Ethernet) supports for flexible deployment and allows the device to be reset remotely. Weatherproof IP65-rated housing resists harsh climates. Note: The PoE part of the router is not waterproof.Dual band speed up to 2.4GHz 150Mbps and 5GHz 433Mbps.Supports AP, Router, Repeater,WISP as operation modes. In the mode of AP, it provides Access Point, Client, Client Repeater modes for wireless solutions. Withstand harsh climatesWN570HA1 has an IP65-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture. Note: The PoE part of the router is not waterproof. Easy Installation With Power over Ethernet(PoE)By combing your power and data connection into a single cable, PoE simplifies the setup of the High power Outdoor WiFi Access Point/Bridge. Combining power and network access into a single RJ-45 connection for the WN570HA1 allow you to install the WN570HA1 in hard to reach location without worrying about running both power and Ethernet cables. How Does It Work? 1.Slide the straps through the slots on the back of the AP/Router and tighten the straps around the hole.2.Connect one end of an LAN cable to the PoE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router.3.Use another LAN cable to connect the LAN port of the power supply.4.Plug the power adapter into a wall socket. Specifications:1.Operating Temperature: -30°C~70°C(-22 ~158F)2.Storage Temperature: -40°C~70°C(-40~158F)3.Power Plug: UK/EU/US/China/Australia(Option)4.Voltage: 100-240V5.Support 2.4 GHz 5GHz6.Standard:802.11 ac/a/b/g/n7.Maximum WLAN security with WPA2,WPA and WEP(128/64)8.Distance:Outdoor 5000m(Change with the Actual Environment) What’s in the package?1 x WiFi AP/Router2 x Antenna1 x power Adapter1 x POE Converter1 x RJ-45 Networking Cable1 x Main body holder1 x Screw fitting2 x Cable ties1 x Quick Installation Guide Note:Select the wireless network with a signal strength greater than 70% to get the most reliable connection.The outdoor antenna should be installed at a height of 2 meters above the roof or in a high open place for better reception WAVLINK AC1200 Dual Band Outdoor Access Point - Expand Your Wi-Fi Coverage to the Vast Outdoors! The WAVLINK High-Power Wi-Fi AP/Repeater/Extender is mainly used for providing reliable Wi-Fi service in large areas such as factories, communities, streets, etc. The AP/Repeater/Extender can take an existing 2.4GHz or 5GHz wireless signal, repeat it, and extend it to a longer range where it is too far away for the router or access point to reach. And it supports transmission speeds of up to 300Mbps over 2.4G band and 867Mbps over 5G band. It has two external antennas, providing even better wireless performance, transmission rates, and stability. Automatically avoids channel conflicts using its channel selection feature. Applicable to Kinds of WeatherIP67-rated weatherproof and heat-resistant housing ensures continued operation in harsh outdoor environments. For example, it is sunny and exposed to the sun; it rains and is wet; it snows and freezes; and there is thunder and lightning. Applicable to Multiple ScenariosIt is suitable for various large-scale outdoor scenes, whether it is your own yard, outdoor swimming pool, school, park, playground, or outdoor parking lot. Waterproof Case DesignThe waterproof housing has an IP67 rating for impressive dust and water resistance, allowing it to operate reliably even when exposed to harsh outdoor conditions or temporary rain. 7dBi Omni Directional AntennaThe high-gain antenna panel has two built-in 7dBi omni directional antennas, which are designed to strengthen the WiFi signal in one direction and make it more concentrated. And WiFi coverage in a specific direction is farther than omnidirectional antennas. Default Parameters5G SSID: WAVLINK-AC XXXX2.4G SSID: WAVLINK-N XXXXDefault IP: 192.168.10.1Default Password: admin How to Install Antennas and Ethernet Cable?1) Pass the RJ45 cable through the spiral cover.2) Pass the RJ45 cable through the rubber seal.3) Pass the RJ45 cable through the holder.4) Connect the RJ45 cable to the RJ45 port.5) Spin 2.4G/5G antenna into the 2.4G/5G external RP-SMA connector.6) Tighten to secure the holder.7) Insert the rubber seal into the holder.8) Secure the spiral cover by screwing it on.Note: The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft. Installation Steps for the Device1) Fasten the main body holder.2) Plug the device into the holder.3) Connect one end of an Ethernet cable to the "PoE" port of the PoE converter.4) Connect one end of another Ethernet cable to the "LAN DATA IN" port of the PoE converter, and connect the other end to a "LAN" port of your router.5) Plug the Power Adapter into the power outlet.6) Push the "ON/OFF" button on the PoE converter to power on. Warm Tips1.The PoE converter is not waterproof, please install it indoors.2.Please make sure your Ethernet cable to the outdoor router is CAT5E or above certified and shorter than 100m/328ft.3.Please install the product 2-3 meters above the ground for better performance. Specification1.Model: WL-WN570HA22.Ports: 1 x WAN/LAN 100Mbps3.Button: 1 x Reset(8s); Status LED: 1 x Power, 1xWAN/LAN, 1 x WiFi , 3 x Signal4.Power Supply: DC 54V/0.3A Power over Ethernet(Passive), DC 48V Power over Ethernet(Active)5.Wireless Standard: IEEE 802.11 a/b/g/n/ac6.Frequency Band/Speed: 2.4GHz(300Mbps), 5GHz(867Mbps)7.Antenna: 2 x 7dBi Omni Directional Antennas8.Wireless Security: WPA-PSK/WPA2-PSK encryption9.Unit Size(without antennas): 18cm x 5cm x 5cm/ 7.1in x 2in x 2in (L x W x H ); Antenna Length: 25cm/9.8in10.Ethernet Cable Length: 100cm/39.4in11.Power Adapter Cable Length: 120cm/47in12.Operating Temperature: -10°C~50°C(-14°F~122°F)13.Storage Temperature: -30°C~70°C(-22°F~158°F)14.Distance:Outdoor 200m(Change with the Actual Environment) Features- Complies with IEEE 802.11 a/b/g/n/ac standards.- Simultaneous Dual Band 300Mbps@2.4GHz+867Mbps@5GHz.- Easy installation, flexible placement.- Supports 802.3AT/AF POE and Passive PoE to supply power.- Supports Router, AP, Repeater modes.- Support FIT AP with WAVLINK AC manager.- Supports 128 bit WPA/WPA2(TKIP AES )- Features 2 x RP-SMA connectors for external antennas.- Robust weatherproof enclosure design.- 15KV ESD and 4KV Lightning Protection.- Features 6 x status LED indicators. In the Box1x AC1200 Dual Band Access Point2x 7dBi High-gain Antennas1x RJ-45 Ethernet Cable1x Power Adapter1x PoE Converter1x Main Body Holder2x Cable Ties1x Screw Fitting Kit1x Quick Start Guide

Price: 37.99 USD

Location: Los Angeles, California

End Time: 2024-10-24T08:31:19.000Z

Shipping Cost: 0 USD