Adhesivo dental fotopolimerizable/Gel de grabado ácido al 37%/Resina composite

Description: Bonding Adhesive Describe： This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials. Scope of application： Used for bonding dentine and enamel with resin and ceramic materials. Clinical operation steps: 1. Pretreatment of caries and pulp protection. 2. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. 3. Apply a layer of adhesive evenly on the tooth surface with a small brush. 4. Make the adhesive layer even as far as possible with the wind power of the air gun. 5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. 6. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes. Precautions： 1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. 2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive. 3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. 4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. 5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it. Environment： This product is operated at room temperature. Storage Conditions： This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight. Shelf Life： This product is valid for 2 years, please do not use expired product. Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated Acid Etching Gel 37% FEATURE： 1. Enamel and dentin etching. 2. Apply special technology to obtain ideal density of the gel. 3. Gel in blue color for better visual management. Indication: It is used for acid etching of tooth enamel and dentin before dental repair. Operation Procedure： 1. Remove surface dirt, rinse the prepared cavities, and blow dry. 2. Apply the etching agent from the tooth enamel to the entire surface of the repair, and etch for 20-40 seconds. The acid etching time of deciduous teeth and dental fluorosis can be extended appropriately according to the actual situation. 3. Rinse with clean water after acid etching, and suck out in time. 4. Use adhesives and resins for bonding repair. Composite Resin A1-A3 Description: 1.All Class of direct restoration for anterior and posterior. 2.Indirect restoration such as Veneer,inlay and onlay. 3.Core buildups. INSTRUCTIONS： 1. Pretreatment and color selection of caries: a、Use non-normalization with a circular holding area.Oil-free prevention of paste or pumice and water slurry clear need to acid etch the surface of the tooth glaze, rinse thoroughly with water.The surface of the enamel adjacent to the cavity should also be cleaned to ensure effective corrosion.Use a color palette to select a color similar to the teeth under wet and natural light conditions. b、Blow-dry treatment: dry thoroughly with oil-free air gun. 2. Pulp protection: In order to find the deep caries close to the pulp,cotton and polyester film were used to protect the lips and teeth,and then a kind of material(polyzinc carboxylate,calcium hydroxide,etc.) which was not compatible with free acid and dentin was selected as the bottom to protect the pulp.After being cured thoroughly, the process of acid etching was started. 3. Weak acid treatment process: Dry with oil-free air gun.then dip in weak acid with a small red rub,carefully and evenly coated in the position to repair.Keep it moist for 60 seconds. 4.Washing and drying process: Rinse thoroughly with water,then isolate lips and teeth with cotton and mylar, and dry with an oil-free air gun. 5.Binder coating process: Dip a white wiper into the binder and apply a uniform layer of binder to the surface of the acid-treated tooth. 6.Light polymerization process: With the help of air gun wind force, as much as possible to make uniform,and then with a halogen cold light source irradiation for 20seconds,to make the binder Curing of film. 7. Filling process of composite resin: Take a suitable amount of the selected color composite resin and carefully fill the cavity tightly,preferably a little higher than the edge of the cavity. 8.light curing process: After leveling and pressing,it is cured with the cold water source of tooth element.Refer to the curing time comparison table. 9.Rough grinding、complex process: The surface of the composite resin is ground flat with the help of a high speed turbine by using an aluminum-alloy knife and a shaping needle or a gold steel grinding wheel. 10.Rough grinding and complex process: Composite materials from the form of the brand in your green with fine grinding, so that the composite finish and tooth axial surface similar. FDA Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name: topdentist City,State:SHENZHEN,China Telephone number:0755-23998164

Price: 7.3 USD

Location: Fullerton, California

End Time: 2023-11-29T03:41:42.000Z

Shipping Cost: 0 USD