Description: Automation Direct Click PLC C0-02DR-D 4 DC Inputs, sink or source. 1 blocks of 4 inputs4 Relay outputs 1 block of 42 Alog in and 2 Alog out.Updated with firmware no 2.6Tested using program to turn on 1 output that in turn supplied an input. That input turns onanother output that supplies second input. This sequence is continued until all inputs and outputsare energized. The pics shows all I/O off and all I/O on during the test.This unit has analog inputs and outputs. These were tested by generating a sine wave in the program and outputing it on DA1. This was connected to AD1 and AD2 and these 2 inputs wereadded within the program with 50% reduction. The result was outputted on DA2. The scope trace isthe 2 analog outputs. The lead is the internally generated and the trailing trace is the DA2 output.This basically checks the analog voltage ins/outs. The current ins/outs were not tested.The error light is on because there is no battery in the unit and the SRAM will not hold power off settings.Unit will ship with terminals and power supply.Test program will probably still be installed in unit.Other comm-ports were not tested.--8-- Buyer pays freightship via UPS ground or usps ground
Price: 135 USD
Location: Greenville, Ohio
End Time: 2024-08-13T10:40:10.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: AutomationDirect
