Description: Avantone Active MixCubes - Black, Pair The Avantone Active MixCubes™ are designed to be high resolution, full-range powered mini-reference monitors for fixed or remote locations. The secondary engineering facet was to create a timeless design that compliments a single full range transducer. Performance objective Studios primarily use two-way and three-way large monitors designed to represent a wide range reference viewpoint at higher listening levels. However, in the newly developing age of high-definition audio, there is still a need to hear what your mix will sound like when played back over small “bass-challenged” systems such as televisions, clock radios, computers, car stereos, iPod docking stations, etc. It is important to make mixing judgments based partially on listening to reference monitors that will not impart tonal anomalies caused by crossovers or inferior full range drivers. Particular attention is always paid to the critical mid-range vocal/guitar/keyboard areas. This is where having a full-range monitor without a crossover is truly revealing. More than twelve months of R&D, comparative listening & tweaking went into the voicing of the AVANTONE MixCubes™. The result is a very smooth sounding, full range upgrade from those old familiar 5C Sound Cubes™ engineers were so fond of in the 1980s and1990s. Listening tests reveal that the MixCubes™ have a smoother mid range, more accurate, transparent top end response with extended bass while maintaining the basic characteristics of those original little cubes.Cabinet DesignConstructed of non-layered, high rigidity MDF board due to its natural low-resonance characteristics All cabinet edges are radiused Limited-edition black finish7mm thick neoprene pad embedded into the base of the cabinet serves as a skid-resistant acoustic isolator For creative mounting situations, we recessed an industry standard 5/8”-27 mic stand mount into the baseSpecificationsSystem Type: Active (Self-powered) shielded full-range stereo pair Frequency Response: 90Hz - 17,000Hz (useful musical range)Driver Impedance: Nominal 8 ohmsMax SPL: 104db @ 1 meter = 1%THD (PINK NOISE)Amplifier Type: Class A/BAmplifier Power: 60 watts RMS@ .005% THD (1KHz) Amp Frequency Response: 22Hz-50KHz +0dB/- 3dB (90Hz-50KHz +/-0dB)Noise: S/N -113 dBSensitivity: 0dBu (.775VRMS) input at maximum volume (+6dB) = 104dB SPLDriver: Proprietary design 5.25" cast aluminum frame / paper cone / shieldedCabinet: Sealed / 18mm MDF / Dacron acoustical stuffingInputs: XLR & TRS (COMBO JACK) +4/Balanced and -10 unbalancedWeight: 7 lb 5 oz (per speaker)Dimensions: 6 1/2" x 6 1/2" x 6 1/2"
Price: 400 USD
Location: Pompano Beach, Florida
End Time: 2025-02-11T22:21:44.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Avantone
Type: Studio Monitor
Color: Black
Model: Avantone Pro MixCube
Connectivity: Wired
Features: Active, Input Gain Control
