Description: With Coral Seas Yellow Out, you can achieve remarkable cleanup results for your pool or spa. This chemical breakthrough effectively eliminates green or mustard algae, providing an ideal surface for EPA-Registered chlorinating compounds to shock your water. Say goodbye to stubborn algae and hello to a perfectly clean swimming experience.Typical results occur in 24 hoursWorks great with higher pH (7.8+)Not affected by high levels of cyanuric acidWorks well with salt chlorine generatorsNO metals added with this productCan be used with all pool surfaces Instructions:(a) NEVER pre-mix YELLOW OUT with chlorine (b) NEVER add YELLOW OUT to a bucket or pail (c) NEVER vacuum pool immediately after application (d) NEVER add to skimmer basket or filter suction line! Very strong reaction with chlorine can occur if not mixed in pool. Circulate pool water through filter and, for best results, brush pool well before beginning.SHAKE WELL TO BREAK UP THE LUMPS (product lumping in transit is normal). Adjust chemical balance to: pH > 7.8, alkalinity 80 -120 ppm, cyanuric acid 25 - 75 ppm and chlorine level 2 - 2.5 ppm.ADD DIRECTLY TO POOL 2 POUNDS YELLOW OUT per 15,000 gallons water. Spread half of it along the perimeter of the pool, starting where the algae are the thickest. Concentrate the rest directly over the problem areas. Never add more than is recommended.WAIT 5 MINUTES, THEN ADD DIRECTLY TO POOL 2 pounds powdered chlorine (or equal) per 15,000 gallons water.CIRCULATE POOL WATER with filtration continuously for 24 hours using only the main drain if possible. Repeat step 4, adding additional chlorine after 12 and 24 hours.Return equipment and chemical balance to normal after clean up
Price: 19.5 USD
Location: Van Nuys, California
End Time: 2024-08-13T21:18:03.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: coral seas
Unit Type: lb
MPN: 17612COR
