Description: PHYSICAL AND MECHANICAL PROPERTIESViscosityDensityForm and Color800 – 1,200 cPs @ 25°C Mixed1.10 g/ccClear Transparent LiquidMix Ratio100 Parts to 50 Parts A By Weight or by Volume 2:1 (Part A to Part B)Working Time45 Minutes @25°C (77°F 100-gram mass)Peak Exotherm70°C (158°F, 100-gram mass)Handle TimeFull Cure Time5.5 Hours36 Hours minimum @ 25°C (75°F)Hardness72± 5 ShoreTee-Peel Strength5.7 Lbs per inch WidthTensile Shear Strength1,300 psi @ 25°C (77°F) 800 psi @ -80°C (-112°F) 550 psi @ 100°C (212°F)Elongation9.0% @ 25°C (77°F)Compressive Strength2,200 psiHeat Distortion Temp80°C (176°F)MAX CLR A/B Available Kit Sizes MAX CLR LOW VISCOSITY 24 OUNCE KIT https://www.ebay.com/itm/311955541111 MAX CLR LOW VISCOSITY 48 OUNCE KIT https://www.ebay.com/itm/311947320101 MAX CLR LOW VISCOSITY 96 OUNCE KIT https://www.ebay.com/itm/222625329068 MAX CLR LOW VISCOSITY 1.5 GALLON KIT https://www.ebay.com/itm/312432570345 MECHANICAL PERFORMANCE TESTImpact testing is one of the most revealing test methods that demonstrate a material's ability to resist and withstand a high-rate of pressure loading. its behavior during and after the impact can define its maximum mechanical property and conditional limits upon its destruction. Why is Impact Testing Important? The impact resistance of an object provides the ultimate measure of its resistance to its definitive destruction. With this knowledge, other aspects of mechanical performance can be accurately derived and through skillful engineering, one can determine: The impact energies the part can be expected to see in its lifetime.PLEASE CHECK OUT OTHER AVAILABLERESIN SYSTEMS AT OUR eBay STOREFor our complete listing, please Visit our eBay store! DON'T FORGET OUR EPOXY MIXING KITClick The Link To Add To Order https://www.ebay.com/itm/222623932456EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY Proportioning the correct amount is equally as important to attain the intended cured properties of the resin system.The container in which the epoxy and curing agent is mixed is an important consideration when mixing an epoxy resin system. The container must withstand the tenacity of the chemical and must be free of contamination.Most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be worn when handling chemicals of the same nature. MIXING KIT CONTENTS 1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams 4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix CupsOne Size Fits All Powder-Free Latex Gloves 2 Each Graduated SyringesWooden Stir SticksAssorted Size Foam Brush IMPORTANT NOTICEYour purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.
Price: 44.17 USD
Location: Ontario, California
End Time: 2024-11-06T19:46:55.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: MAX CLR A/B 24 OUNCE KIT Dome Coating Kit
Country/Region of Manufacture: United States
California Prop 65 Warning: Please Review Important Safe Handling Information In The Product Description Page Below. This product contains less than 0.1% (trace amounts) of a chemical known to the State of California to cause cancer. ●All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements under 40 CFR 720.30●
Crystal Clear Dome Coating Resin: Stickers, Decals, Photographs, Laser Printed Image
Excellent Clarity And Toughness: Resist Surface Scratching And Impact Damage
Type: Dome Coating Epoxy
Expiration Date: Does Not Expire
MPN: MAXCLR48DomeCoatingKit
Brand: MAX EPOXY RESIN SYSTEMS
