GBA ITA TFT Backlight Kit with Laminated Lens and OSD

Description: The Laminated ITA Kit for Game Boy Advance from FunnyPlaying. **This kit ONLY pairs with these shells from FunnyPlaying. FEATURES: An ITA screen and lens all in one piece. Adjust brightness with touch sensor or button inputs. Applicable console text is present on lens. Silver text. Long touch the touch sensor for OSD menu. INCLUDED: 1 x ITA LCD with lens adhered (see warnings) and PCB ribbon cable attached 1 x 32 pin ribbon with touch sensor 1 x 40 pin ribbon with touch sensor 3 x Wires 1 x Bracket PAIRS WELL WITH: Game Boy Advance IPS/ITA Laminated Shell - FunnyPlaying (ONLY pairs with this shell) Game Boy Advance Silicone Membranes - FunnyPlaying Game Boy Advance Buttons - FunnnyPlaying DOCUMENTATION: Install Guide Install Video How to test your LCD kit NOTES: Only pairs with the Replacement Shell for Game Boy Advance - IPS Laminated - Funnyplaying. Other shells will require extensive trimming. If you received a bracket that looks different from the one in the product photo, you may have received the wrong bracket. Please check to make sure you have received the correct bracket. If this is not completed and the LCD kit is damaged, refunds will not be accepted. 40-pin Consoles need to remove the C54 capacitor. Long press touch sensor (two seconds) to enter OSD menu or hold Select, L, and R if you have soldered those wires. Enter the menu and press and hold for one second to switch the selection. To use the screen adjustment in the OSD menu, you will need to solder the Select, L, and R wires. After installation, if it is noted that your touch sensor is overly sensitive or is cycling, please see this article for assistance. WARNINGS: You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens. Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return. LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.

Price: 59.99 USD

Location: Willow Grove, Pennsylvania

End Time: 2024-08-08T16:49:58.000Z

Shipping Cost: 4.5 USD