Description: INTER-MIX 5 Adhesive/Seam Sealer Is a firm, semi-flexible, adhesive/sealant designed for sealing vertical and horizontal seams and joints on automobiles and truck applications. Excellent adhesion to: bare metal, primed metal, SMC, FRP, fiberglass, aluminum most plastics. Can be sprayed with our 2K Spray System. * For TPO and Polypropylene plastics, use IES #4182 INTER-BOND Adhesion Promoter. DIRECTIONS 1. Surface must be clean and free of dirt, grease, oil, rust, old seam sealer and any other contaminants. Use IES Super Cleaning Solvent or IES Specialty Adhesive Remover to clean the surface. 2. Prime all bare metal with epoxy or urethane primer. Allow primer to cure according to manufacturer’s recommendations. 3. Follow the IES dual cartridge set up instructions for loading cartridge into the dispensing gun. 4. Dispense IES 8412/8612 Seam Sealer into the joint or seam. Smooth out if desired with tool or fi nger and feather edge. 5. IES 8412/8612 will set up in approximately 5-10 minutes. 6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting. 7. Prime and paint per manufacturer’s specifications. TECHNICAL INFO Mixed Color Gray Mix Ratio 1:1 Work Time 5-10 Minutes Handling Time 10-20 Minutes Part Paint-ability 20-30 Minutes Sealer Sand-ability 20-30 Minutes Full Cure Strength 6-8 HoursAll times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity
Price: 34.99 USD
Location: San Antonio, Florida
End Time: 2024-02-29T19:44:25.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Manufacturer Part Number: 8612
Brand: International Epoxies & Sealers
