Land Cruiser 100 Series Lx470 98-07 Interior Led Kit 5k pure White w/ RED MAP

Description: I've put together a few Interior LED kits for the 100 series. The goal for my kits are more light crisp white (no yellow and no Blue) I buy my LED's in bulk inspect and reject if it is not the right color. I wanted brighter lights with out being too bright and kill all bits of low light vision when you shut the door. These also use very little power so if they are left on or a door not closed your battery will not be killed even over night. I left a dome light on once and left town for 3 days. It was still on when I got home and the engine started without an issue...Thats the #1 reason to upgrade your bulbs to LED, but I bet you will like the additional light and the modern pure crisp white color. This kit includes: 2 front map lights T10 White 2 front map lights T10 Red for optional red map lights mix and match as needed 3 middle row Festoon style, (I've seen some aftermarket/dealer middle row screens, where these 3 will not fit the housing) 4 Lower door T10 1 large panel with festoon adapter Land Cruiser 100 Series Lx470 98-07 Interior Led Kit 5k Cool White. 2 License plate T10 I tried to include pictures to help with install on how to pop the covers off to gain access and change the bulbs. Please Note LED's are directional. insure the switch is one. if they don’t light up turn the led lights around. have the lights off to start so the original bulbs are not hot when you try to pull them out. then turn on the switch to install and get the orientation correct. - The door lamps pull out of the door by prying from the front of each of the doors. I would unplug them and let them sit to cool before pulling the bulbs out, after removing the bulbs plug them back in so you can test the led orientation before putting the covers back on and slipping it back in the door. Note the left and right housing are different. the shape will match the door cutout. insert the back side first then the front to snap them in place. -The front dome lights have a slight indention on the outside edge to pry with a small flat head screw driver. - The middle row has one large cover with small grove in 2 places on each side. you can start at any of those points. - The rear cargo light uses double sided tape remove the back and find a nice flat spot as shown to stick it into place. -The license plate bulb housings come off from the inside edge first. the bulb connectors rotate out of the housing. turn one your head lights the get the led's oriented correctly and reinstall Feel free to ask any questions before or after purchase. Thank You

Price: 43 USD

Location: Olathe, Kansas

End Time: 2024-08-28T04:51:24.000Z

Shipping Cost: N/A USD