Likesilk 3D Printer Filament PLA F 1KG 1.75mm 3D Penfilament Gray 0.25KG

Description: 【High Quality PLA F Filament】PLA is a commonly used thermoplastic material with low melting temperature and ease of use, low warpage and shrinkage. We add 15% ABS to make it tougher and less susceptible to aging. 【Dimensional Accuracy & Consistency】Tight tolerances ensure smoother and more stable printing with these 1.75mm diameter PLA filaments, with dimensional accuracy of +/- 0.02mm; 0.25kg spool (0.55 lbs). 【Not easy to tangle, easy to use】Full mechanical winding, strict manual inspection to ensure that the threads are arranged neatly, not easy to tangle, and avoid possible breakage and disconnection. Larger spool inner diameter design makes feeding easier. 【No Clogging, No Bubbles】Designed and manufactured with no clogging, excellent layer adhesion and good flowability for smooth and stable extrusion. Dry completely for 24 hours before packaging, and the bag is vacuum-sealed with desiccant to protect the filament from moisture and free of clogging and blistering problems. 【Wide Compatibility】Universally compatible with most common 1.75mm FDM 3D printers on the market due to high quality standards in manufacturing accuracy and small size tolerance of +/- 0.02mm. Product Description Printing Characteristics：It has good toughness, resistance to aging, easy printing, and light density. One kilogram of PLAF is 380 meters long.The same printed model is lighter than ordinary PLA; Product Introduction：This material improves the material properties of pure PLA, which is brittle, easy to get wet, and easy to degrade. The disadvantage is that because it contains 15% ABS, there is a s light smell during the printing process; Recommendations before use 1.Bambu A1P1X1 model user default selection [Generic PLA] material parameters by default, only change the hot bed temperature to 60, other parameters by default; 2. It is not recommended to seal the box to print, seal the box for a long time will make the extruder temperature rises caused by plugging; 3. It is very recommended to take the mold after printing and so on completely cooled down, please pay attention to the safety with the spatula, if it is very difficult to take down the model is recommended to drop to the bottom of the model; 4. The first layer of broken skin and holes recommended to increase the number of layers of filling or capping, hanging poorly recommended to increase the fan cooling or add support, according to the hardness of the demand for an appropriate increase in the number of wall thickness circle. 5. If there is a whitening phenomenon caused by stress, please use a lighter to iron it. PS: The above is just a printing suggestion, the first time we use it, we suggest that we first play a test square or a small boat, according to the effect of fine-tuning.

Price: 7.2 USD

Location: Denver, Colorado

End Time: 2025-01-07T11:51:17.000Z

Shipping Cost: 0 USD