Motul 300V LE MANS 10W60 2L Fully Synthetic ESTER Racing Engine Motor Oil 110864

Description: Ships same day if ordered M-F before 4PM PST. Returns are accepted in SEALED condition only. Car racing motor oil with ESTER Core® Technology.All racing gasoline or Diesel engines, naturally aspirated, turbocharged or supercharged fitted with injection (direct/indirect) or carburetted.For tuned engines and high performance cars operating over a wide range of rpm and temperatures, in severe driving conditions.Suitable for all types of fuels, gasoline, Diesel and biofuels (especially Ethanol).PERFORMANCESSTANDARDS: Above existing standardsTYPE OF USE : Circuit, Drag race, Drift, Endurance, GT, Hill climb, Historic racing, Rally, Rally cross, Track days, Tuning... Consult your tuning service partner for appropriate type of use.ESTER Core® TechnologyFor decades MOTUL has developed high performance synthetic Ester based lubricants.The 300V Line includes the latest evolutions of MOTUL’s proprietary ESTER Core® Technology to ensure maximum engine power output without compromising reliability and wear protection. MOTUL has created a perfect synergy formula to increase performance and protection of the engine selecting esters over other high performance synthetic and organic base stocks and combining them with an innovative additive package. This exclusive Racing formulation now features biofuels (especially Ethanol) and particulate filter compatibility, LSPI protection and lowers its environmental impact.Esters are polar molecules hence are attracted to metallic surfaces. ESTER Core® Technology features optimized polarity for maximal adherence of the oil film to increase engine protection, reliability and driveability, even in most extreme conditions.Used only in the 300V range, this exclusive technology guarantees you more:Maximum power output: Friction reduction for maximum power and torque at all rpm Reliability: High shear stability for maximal oil film resistance to reduced engine wear • Life: Increased oxidation resistance for longer engine & oil life durationDriveability: Maximal polar adherence of the oil film for rapid engine rpm responseEasy start: Fast oil pressure build-up and optimal oil flowReduced oil consumption: Low oil volatility and evaporation helps to control oil consumptionDetergency: High detergency performance allows better engine cleanlinessDriving comfort: Lower friction level brings engine noise reduction in all driving modesThis racing formulation 300V with exclusive ESTER Core® Technology features biofuels and particulate filter compatibility and LSPI protection.Biofuels: Compatible with alcohol-based fuels, especially Ethanol (up to E85)LPSI protection: Compatible with downsized engines subjected to Low Speed Pre-Ignition issuesParticulate filter: Compatible with particulate filter requiring reduced SAPS (Sulfated Ash, Phosphorous, Sulfur) level(SAPS: 0.91% weight and TBN: 8.1 mg KOH/g)ORGANIC BASEThe Organic base using non-fossil renewable materials is limiting the environmental impact and allows MOTUL to lower its carbon footprint by 25% during manufacturing process.The 300V LE MANS series viscosity grades allow stable oil pressure and bring the maximum reliability to your engine in all extreme conditions.These 300V LE MANS series viscosity grades can cope with engines subject to high engine oil dilution from unburned fuel and are suitable for engines featuring high clearances.RECOMMENDATIONSMOTUL 300V LE MANS series are suitable for some engine applications and are particularly recommended for endurance, drift… etc, or historic racing engines (rebuilt engines) requiring high protection against wear and very stable andconsistent oil pressure.Adapt or choose the right 300V viscosity grade according to the viscosity grade recommended in your owner’s manual or by your tuning service partner.To guarantee optimal engine performance, avoid mixing with other synthetic or mineral lubricants.Oil Change: Consult your tuning service partner for appropriate drain interval and tune to your own use.PROPERTIESViscosity gradeSAE J 30010W-60Density at 20°C (68°F)ASTM D12980.854Viscosity at 40°C (104°F)ASTM D445162.1 mm²/sViscosity at 100°C (212°F)ASTM D44523.6 mm²/sHTHS viscosity at 150°C (302°F)ASTM D47415.5 mPa.sViscosity IndexASTM D2270176.0Pour pointASTM D97-36.0 °C / -33.0 °FFlash pointASTM D92234.0 °C / 453.0 °F

Price: 37.95 USD

Location: Woodinville, Washington

End Time: 2024-08-07T17:45:02.000Z

Shipping Cost: 0 USD