Ortho Polyester Laminating Resin- 8 Gallon Kit with MEKP Catalyst- Marine Grade

Description: Rated Excellent Ships Next Business Day Free US Shipping Visit Store About Us New Arrivals View Feedback Contact Us Browse Here... TOP QUALITY PRODUCTS Free & Fast Shipping Great Customer Service SATISFACTION GUARANTEE Item Description Ortho Polyester Laminating Resin- 8 Gallon Kit with MEKP Catalyst Fast wet out Cures with a surface tack so no need for sanding between layers Cures at room temperature with MEKP catalyst No sagging on vertical surfaces Thixotropic Only $379.95 Buy Now DESCRIPTION Shipping Return DESCRIPTION Details: Fiberglass Warehouse Ortho Polyester resin is a general purpose orthophthalic (ortho) polyester laminating resin. It cures with a surface tack. Pre-promoted for curing at room temperature with the addition of methyl ethyl ketone peroxide (MEKP) initiator. Fiberglass Warehouse Ortho Polyester resin has a clear amber tint to it. Uses: -Boat construction and repair -Molding, fabrication and repair of fiberglass laminates -Spray up process -Hand lay-up application -Base resin for polyester fairing putties and structural compounds Application: -Work area and resin should be between 70°F and 75°F for best results. -Make sure the work area is well ventilated and wear proper safety clothing including gloves and a face mask. -MEKP catalyst is needed for polyester resin to cure. It should be added between 1-2% based on the volume of the resin. More or less than this will cause an improper cure. Cure time and pot life will vary depending on percentage of MEKP added and the temperature of the room. If 1% MEKP is added, there will be a longer pot life and it will cure slower than if 1.5% or 2% MEKP is added. Same goes for temperature. Lower temperatures result in a slower pot life/cure time than if working in higher temperatures. Orca 200 is promoted to gel in 17-23 minutes at 77°F when catalyzed at 1 percent (approx. 1 tsp per pint). -Apply using a fiberglass roller, brush, spreader or squeegee -No need for sanding between layers -For the final layer, a finishing resin can be used to create a hard, tack-free surface. Finishing resin contains wax which rises to the top when cured and seals off the air. -Uncured polyester resin can be removed from tools and equipment with acetone. Handling and Storage: Closed containers should be stored in a cool, dry place. It should be stored at temperatures below 75°F and away from sunlight and heat sources. Fiberglass Warehouse Ortho Polyester Resin is guaranteed for 3 months but should last 6-12 months if stored properly. Shipping We offer free shipping on all Fiberglass Warehouse products on Ebay. Our products are shipped from the US via USPS or UPS ground. Orders are typically shipped out 1-2 business day from time of purchase. **Make sure you check your shipping address at checkout. A street address is needed as UPS generally cannot ship to PO boxes. Return You can return most new/un-opened products that you purchased from our store within 30 days of delivery. Buyer is responsible for return shipping. Once we receive your return, we will process the refund. Please be aware that it can take your bank anywhere from 5-10 business days to process the refund request. Categories Other About Us Fiberglass Warehouse is an on-line distributor of composite materials. We cater to both the large fabricator and the smaller consumer. We sell products from the world’s leading manufacturers and all of our products are first quality. We do not offer seconds. Our stock is competitively priced. We want to assist you in meeting your demanding production schedule. In doing so, we are committed to the on-time delivery of your composite needs. Links Visit Store About Us View Feedback Contact Us Newsletter Sign up to our newsletter to receive details of new offers and promotions. Subscribe to Newsletter Copyright by © "fiberglasswarehouse" Design By ebay_experts

Price: 379.95 USD

Location: Sarasota, Florida

End Time: 2024-01-08T00:08:38.000Z

Shipping Cost: 0 USD