PIPE AND DRAPE TRADE SHOW BOOTH KIT (WITH PREMIUM DRAPES)

Description: A complete pipe and drape trade show booth kit with everything you need for an 8 foot high back wall (up to 10 feet wide) x 3 foot high side walls (up to 10 feet deep)! What's Included In The Listing:2 pieces: 8'H Fixed Silver Aluminum Slip-Fit Uprights, 1.5" Diameter2 pieces: 16" x 14" Silver Steel Slip-Fit Bases with Base Pins (edge protectors optional**) 2 pieces: 3'H Fixed Silver Aluminum Slip-Fit Uprights, 1.5" Diameter 2 pieces: 8" x 14" Silver Steel Slip-Fit Bases with Base Pins (edge protectors optional**)3 piece: Adjustable 6-10 Foot Width Silver Aluminum Drape Support Rod3 pieces: 94"H x 60"W Premium Drape for back wall 6 pieces: 34"H x 60"W Premium Drape for side walls Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering. Premium drapes may have dye lot differences. **The edges of these bases can be raw or rough. Edge protectors help protect your hands and the flooring. If you choose to not have edge protectors, we suggest wearing gloves when handling these bases. About The Drape:Premium drape is a Durably Flame Retardant (DFR), mid weight fabric than our Economy drape and has a look and feel of a linen napkin or tablecloth at a fine dining restaurant. Premium drape blocks approximately 70-80% of light**. It is regarded as a step up from Economy drape in both fabric weight and style (the finish is matte and it does not have the open weave pattern that the Economy drapes have). **This opacity scale is an approximation under normal circumstances. A variety of factors can affect the opacity, including the amount of back-lighting, spacing from a wall, and the overall brightness of the lighting used in a room. For example, using the drape near a wall makes it more opaque than if it's used in front of a window with sunlight shining through. In situations with a lot of bright lighting, you can make help make it more opaque by purchasing an additional drape panel (or two), sold separately in our store. For situations in which the drape must be completely opaque, it is recommended that you use our Commando or Velour fabrics. They are machine washable (gentle cycle, like colors, cold water, mild liquid detergent should be applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with drape as it may alter the color), can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140°F. Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering. Premium drapes may have dye lot differences. All drapes will be the color selected from the drop-down menu. Please contact us if you wish to have mixed drape colors (additional fee applies). About The Hardware: Uprights (vertical pipe): Size (Back Wall Uprights) - 96"H x 1.5" diameter Weight (Back Wall Uprights) - Approximately 2.1 lbs each Size (Side Wall Uprights) - 36"H x 1.5" diameter Weight (Side Wall Uprights) - Approximately 1.2 lbs each Material - Aluminum Color - Silver Other - Four 90° slots are located at the top of each upright; 96"H upright also has slots cut out at 36"H Bases (underneath each upright): Size (Back Wall Bases) - 16" x 14" with stacking slot Weight (Back Wall Bases) - Approximately 10 lbs each with included 3"H steel base pin Size (Side Wall Bases) - 8" x 14" with stacking slot Weight (Side Wall Bases) - Approximately 6 lbs each with included 3"H steel base pin Material - Steel Color - Silver Other - Edge protectors optional Drape Support Rod (horizontal pipe): Size - 72"L at collapsed size, 120"L at fully extended size, 1.5" diameter Weight - Approximately 4 lbs., max. weight capacity is 15 lbs. Material - Aluminum Color - Silver Other - Adjustable from 6 to 10 feet wide. Button stop at 8 and 10 foot intervals. What Is The Slip-Fit System? The slip-fit system is designed to be a tremendous time saver for setting up and breaking down your pipe and drape display. The uprights are hollow, allowing them to simply slip over the base pin (included with each base). The drape support rod features steel hooks at each end that slip inside of one of the four slots cut out at the top of the upright. Estimated set-up time varies based on the number of people and the speed at which he or she works, but should average about 5-10 minutes once the boxes are unpacked. The only tool required is a flat head screwdriver to screw the base pin onto the base (a very simple task). Other than that, no tools for assembly are required. IMPORTANT: Use of products are intended for indoor, decorative use only. They should never be used where tip-over may cause injury or damage. Failure to use these products as intended will likely affect the safety of the products used and can result in injury or damage for which we are not responsible. The maximum weight capacity for the drape support rod is 15 pounds. Any box that is delivered, or component piece within a box, may be sharp, and should be handled with care. Additional Information: We answer any and all questions as quickly as possible. Our staff is available to assist you Monday - Friday from 9:00 am to 5:00 pm EST. We also sell all component pieces separately if an entire kit is not needed. Please contact us for more information.

Price: 449.99 USD

Location: Marietta, Georgia

End Time: 2025-02-02T22:32:36.000Z

Shipping Cost: 0 USD