Rebuilt 4L60E Valve body 93-94 GM

Description: PLEASE VERIFY COMPATIBILITY BEFORE BUYING. IT IS THE BUYER’S RESPONSIBILITY TO DETERMINE WHETHER THE PART WILL FIT HIS/HER CAR OR NOT.WHAT YOU SEE IN THE PHOTOS IS WHAT YOU WILL RECEIVE. NOTE:Please check if the pictures are consistent with your product.All of our products are rebuilt with OEM Products.This listing is for a Remanufactured GM 4L60E Valve Body, model years 1993-1994. This valve body is a Non-PWM TCC type.This valve body is better than OEM, it features many upgrades to increase reliability over the standard OEM valve body.These upgrades include: updated AFL, TCC and accumulator valves, remanufactured EPC & PSM and all other solenoids are tested and rebuilt or replaced.PLEASE NOTE: There is a $50.00 Refundable Core Charge that is added at checkout. Once you remove your defective valve body and return it to us, the Core Charge will be refunded to you. For detailed instructions, please read the Core Charge section on our FAQs/Glossary page.If you need help identifying the valve body you need, we can do a VIN# lookup for your vehicle to make sure you get the right part the first time. Please see the Technical Information/Identification Guide below for information on how to properly identify the valve body your vehicle needs. If you have questions or need assistance please contact us and we will do our best to assist you.Technical Information Troubleshooting Guide Problem: Some or all Solenoid Codes set when the vehicle is started. Possible Cause #1: Check battery voltage during cranking. If the battery voltage drops below 10.5 volts, the battery needs charging, the cables need to be cleaned, or the battery needs to be replaced. Possible Cause #2: The ignition switch may be faulty. Install a fused jumper wire between the positive battery cable and the "Trans" fuse in the fuse box on trucks. This will keep battery power to the solenoids during cranking if the ignition switch is bad. Start the engine and check for codes. If no codes are present with the jumper wire in place, then the ignition switch is bad RETURN POLICY:RETURN within 30 days and receive a full refund. No cash refund after 30 days, only replacement. If an item is Damaged, missing, or incorrect you must report it within 72 hours. We will correct any mistakes within 48hours. For Damaged items you must send pictures of damage for our insurance claim policy. We will process your replacement unit the same day. It's just that simple. WE OFFER A LIFETIME NO HASSLE REPLACEMENT WARRANTY ON ANYTHING THAT GOES WRONG WITH THE VALVE BODY. PROBLEM WITH YOUR PURCHASE?Contact us before anything and we will ensure to get back to you within 48 hours with a resolution. ABOUT US & OUR PARTS: WE ARE A FULL LINE OF REMANUFACTURED TRANSMISSION OEM VALVE BODIES AND SOLENOIDS AND GUARANTEE TO MATCH OR BEAT OUR COMPETITORS PRICE. Each valve body is fully tested and a match to OE specification. NO programming needed. All of our Valve Bodies are PLUG AND PLAY. Each valve body is completely disassembled, cleaned, updated with top-quality OEM parts and fully tested and pressure to match OE specification and performance. When you purchase our item you agree to our policies, terms and conditions above. Our lifetime warranty it requires installation within 30 days means that the product must be installed correctly and used as intended within that time frame in order for the warranty to be valid. Once the product is installed within the specified period, the lifetime warranty becomes active and will cover the product for the lifetime of the product.

Price: 169.99 USD

Location: Dublin, Ohio

End Time: 2024-10-19T18:26:57.000Z

Shipping Cost: 0 USD