Team Losi Mini-B 2.0 Upgrade HD Servo Mounts + Horn for Savox Micro Servo

Description: AJCMods 3D Printed Extended Servo Mounts + Horn for the Losi Mini-B. Ideal for Savox Micro Servos (0264mg, 0265mg, 0263mg) - this is the only way to properly mount an aftermarket servo to your mini-t! Assembly Instructions:The long screw is used in conjunction with the nut on the horn to squeeze the clasp tight once installed on the servo. Install this long screw and nut prior to install, but do not tighten yet. The tolerances on these parts are very tight so you may have to use a set of pliers to install the nut. The shorter screw is used to fasten the horn to the servo. Once the servo has been mechanically or digitally 90'd (making sure the horn stands as close to perpendicular to the servo body when in the neutral position), press-fit the horn in place, pressing all the way down, then secure it with the shorter screw. Tighten the clasp with the already installed long screw for a secure fit. You can re-use the ball that comes with the car stock and thread it into the lower hole of the servo horn. Install the mounts and then clip the stock steering wiper arm to the installed horn ball and fasten the servo mounts using the stock servo mount hardware. Important note about the horn: The horn in this kit comes with little to no internal spline, and it is designed to be slightly undersized. The first time the horn is press fit on the servo it will perfectly imprint the spline of the servo onto the horn. We suggest press fitting the horn until snug, and then drawing it the rest of the way down with the horn screw. What's Included & Specifications:2x Servo Mounts1x Servo Horn (New Clamping version now with M2x6 screw, M2x8 screw, and M2 nut) Notes: -Savox Servo shown is not included, can be found as a bundle: Click Here

Price: 7.95 USD

Location: Acworth, Georgia

End Time: 2024-01-10T20:06:31.000Z

Shipping Cost: 2.49 USD