Description: Trailer Brake Control Harness 3036 D 1. Make sure the vehicle is off with the keys removed from the ignition.2. Locate the instrument cluster finish panel in the center of dash on driver side. Pry the panel out and away from the dash being careful not to damage the trim or panel. Unplug the housings attaching the panel being careful not to damage locking tabs and set aside. Option 1: Locate and remove two bolts, exposed in step 2. Remove bin. Unplug grey connector from back of bin. Option 2: On vehicles equipped with factory brake controller locate the large grey housing matching the mating half of the adapters connector. Housing will be plugged into the back of the unit. Additional harnesses may need to be unplugged to gain access to its location.NOTE: When disconnecting the factory installed brake control, you will get a fault code displayed on the message center of the dash. 4. Plug the brake control adapter into the vehicle’s electric brake control harness connector.5. Locate a routing path for the adapter to exit the bottom of dash.TIP: Use a flash light to shine light up though the bottom of dash to locate a hole to exit the dash.6. Complete the installation per the electric brake control manufacturer’s instructions and mount the unit as directed. Perform test procedures as instructed.7. After brake controller is installed, plug in all connectors that were not used back into the original housings and snap access panel back into place.NOTE: Vehicles not equipped with OEM trailer tow package, may require fuses and relays to complete output and battery feed circuits (sold separately). Consult owners manual for locations Our units are designed for brake controls manufactured with electrical wiring mounted on the back of the unit, otherwise known as a pigtail. Wiring harnesses must be spliced into the existing pigtail to allow the vehicle specific plug to be installed. ******************* CUSTOM DESIGN: Tekonsha trailer brake controller harnesses are designed to make connecting your brake controller to your vehicle quick and easy. These harnesses fit into any Tekonsha brake controller with a Plug & Play port. The other end fits into the factory plug in your vehicle. EASY INSTALLATION: Tekonsha’s Plug & Play design lets you use the wiring harness to easily connect your brake controller to your vehicle, no cutting, splicing, or taping required. Simply follow the detailed vehicle specific instructions included with your product to install. PROTECTED WIRING: The four copper wires in each harness are covered with a braided mesh to give a factory-installed look. The covering also provides protection from damage like nicks and punctures, keeping the harness wires safe from elevated temperatures and potential shorts. VERSATILE: This brake controller wiring kit works with every activation type whether it be proportional or time-based brake controllers in the Tekonsha line. APPLICATIONS: This Tekonsha brake controller harness fits the following make and model year vehicles: 2021-2024 Ford Bronco, 2015-2022 Ford Expedition, 2009-2021 Ford F-150, 2017-2022 Ford F-250 Super Duty, 2017-2022 Ford F-350 Super Duty, 2017-2022 Ford F-450 Super Duty, 2017-2022 Ford F-550 Super Duty, 2012-2020 Ford Flex, w Factory Tow Package2012-2020 Lincoln MKT, w Factory Tow Package2015-2024 Lincoln Navigator.
Price: 19.99 USD
Location: Fayetteville, North Carolina
End Time: 2025-02-06T21:23:19.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: Tekonsha
Type: Brake Control Adapter
Interchange Part Number: 3036-P
Connector Type: Fits Prodigy, Reese, Draw Tite. Tekonsha, Tow Ready, Pro Series
Manufacturer Part Number: 3036 D
Placement on Vehicle: Rear
