Vintage Pioneer SA-800 Solid State Stereo Integrated Amplifier

Description: This early 70s Pioneer Integrated Amplifier works as it should and sounds fantastic - very warm & full tube-like. Rated at 26 watts per channelTested at 34.5 watts per channelDescription:The Pioneer SA-800 combines a modern control panel with luxurious cabinet styling in natural wood. Used together with other Pioneer Hi-Fi components, it presents an appearance of perfectly matched, systemized elegance.The equalizer/head amplifier consists of three direct coupled stages, possessing high gain and, therefore, a wide dynamic range. Emitter to emitter feedback results in high stability and extremely accurate equalizing characteristics.The power amplifier stage is a quasi complementary design with direct coupling, ie without coupling capacitors between the individual stages. This results in a super wide frequency response curve ranging from near DC to well above the audible sound range.To maintain high output power with good stability, a positive negative symmetrical power supply unit is employed. These design features make the SA-800 power amp stage one of the world's most advanced Hi-Fi amplifiers.The SA-800 is equipped with terminals for a full range of program sources including two turntables, a tuner, two tape decks, microphone plus two auxiliary sources such as a cartridge tape player or TV sound track.With two tape decks connected, duplicating and editing of recorded tapes becomes extremely easy.The SA-800 incorporates a wide range of extra features which mark it as a truly advanced, versatile amplifier. These include a speaker selector which enables two sets of speakers to be used separately or together, a Pre and Main switch permitting independent use of the pre and power amplifier sections in a multi amp installation, an audio muting switch, a mode switch and a loudness switch.SpecificationsPower output: 26 watts per channel into 8Ω (stereo)Frequency response: 20Hz to 60kHzTotal harmonic distortion: 0.5%Damping factor: 65Input sensitivity: 2.3mV (mic), 0.11mV (MC), 3mV (MM), 56mV (ceramic), 230mV (line)Signal to noise ratio: 80dB (MM), 100dB (line)Output: 230mV (line), 35mV (DIN), 3V (Pre out)Speaker load impedance: 4Ω to 16ΩSemiconductors: 2 x FET, 35 x transistors, 20 x diodesDimensions: 430 x 145 x 337mmWeight: 10.3kgYear: 1971

Price: 300 USD

Location: Overland Park, Kansas

End Time: 2024-11-15T10:22:44.000Z

Shipping Cost: 0 USD